We are a private company located at 20 km East from the border with
Hungary, set up in 1992 , producer and exporter of wood products.
Examples of offers
Our present offer - the all quality is
in concordance with Germany and Austria European standards.
1. Edged oak (petrae
& robur Quercus) timbers
QF2 and QF3 standard qualit
Dimensions:
28 x 160 x 2030 (80%) and 1530 mm (20%) = measure of sawing
26 x 150 x 2000 (80%) and 1500 mm (20%) = invoice dimensions
Quality: QF2 - fresh,sound knots in
diameter till 20-25 mm on
One side allowed and black knots 1-2
pieces in diameter till 10-20 mm on the other side allowed, without
heart,sapwood not allowed; Min. 50% of the loading.
QF3 - fresh,sound knots in diameter
till 40-50 mm and black knots in diameter till 20-25 mm on two sides
allowed, heart on one side allowed up to 1/3 of the length ,sapwood
allowed only on one side;
Max. 50% of the loading; Grain-ends
waxed;
Packing: 120 pcs on one ordinary
pallet; every pallet labelled with the quality indication. Every lay on
small sticks (of spruce oroak) of ca. 2 x 2 cm., on every 40cm(start with
one stick on every end). This sticks, strait under each other, not smaller
and not wider than the packet. * 4 straps on every pallet; is for damageby
transportation.
In one cnt./truckload min. 50% QF2 and max.50% QF3. One quality in one
packet.
Quantity: 8 - 12 trucks/cnts. 20 ' by
month, or even more (min. loading 14 m3 - Neoot/ truck)
2.) Oak (robur &petraea Quercus ) edged sawn
boards
edged sawn boards, fresh cut : QFA / QF1 B / QF2-3 (max.50% QF3) ,
standard quality in the dimensions and full compliance to French Standard
Appearance Grading Of Sawn Oak issued by APECF :
Thickness:26 mm (cutting size minimum)
29mm
Width : 100 mm (cutting size 110 mm / 120 mm (130) / 140mm (150) /
160 mm (170) / 180 mm (195) / 200 mm (215) ; Length: 2000 mm. and up,
steps 100mm (3cm. oversize in length)
Quality QFA: All 4 sides clear, no
heart, no sapwood, no cracks, no moonrings, fresh cut, one dimension on a
pallet, on dry softwood stickers of min. 20 mm. thickness, every 50 cm one
lath and at the ends, ends paraffine-waxed, pallet height 1100mm, 3 cm.
oversize in length.
Quality QF1B: Maximum 2 intergrown
sound knots of 10 mm maximum per linear meter on each side , no heart, no
sapwood, no cracks, no moonrings, fresh cut, one dimension on a pallet, on
dry softwood stickers of min. 20 mm. thickness, every 50 cm one lath and
at the ends, ends paraffine-waxed, pallet height 1100mm, 3 cm. oversize
in length.
Quality QF2:
Small knots without limitation � maximum 3 intergrown sound knots of
maximum 25 mm per linear meter, on each side , no heart, no sapwood, no
cracks, no moonrings, fresh cut, one dimension on a pallet, on dry
softwood stickers of min. 20 mm. thickness, every 50 cm one lath and at
the ends, ends paraffine-waxed, pallet height 1100mm, 3 cm. oversize in
length.
Quality QF3:
Small knots without limitation � maximum 3 intergrown sound knots of
maximum 35 mm per linear meter, on each side , no heart, no sapwood, no
cracks, no moonrings, fresh cut, one dimension on a pallet, on dry
softwood stickers of min. 20 mm. thickness, every 50 cm one lath and at
the ends, ends paraffine-waxed, pallet height 1100mm, 3 cm. oversize in
length.
3.) Fresh Oak (petrae & robur Quercus) and
Turkey Oak (Quercus cerris) special offer
Our special offer of min. 300 - 400
m3/month is fresh Oak and Turkey Oak unedged boards / timber , in
the following quality grade and dimensional structure:
thickness : sawing measure 54 mm / invoice 50 mm or sawing measure 28 mm
/ invoice 26 mm ; width at the middle of length : 15 cm+ (40%) and 20 cm+
(60%)
lengths : 2 m - 2,5 m (30%) and 2,5 m + (70%)
Quality:
5 - 10% QFo/QF1 - the both sides of width , clean;
20 - 25 % QF2 /QF3 difference QF3/QF4
4.) Spruce timber/boards for construction
Quality: fresh and/or AD, allow
unlimited sound knots in number and diameter measure and black knots until
25mm in diameter, also allow only suond / health heart - approx. equal
with the spruce timber cross section/coloration, occasional / discret
allow the little discoloration, the edge are clean and parallel.
Air dried(AD) spruce - is the time
from wood cut until at the delivery date and to comprise the real
transport shipping time at the buyer destination.
Quantity/month = min. 500 - 1.000 m3
5.) Beech (Fagus sylvatica) logs
1st grade (Veneer grade):
Diameter: 50 cm+, under bark
Length: 2.5 m � 3.0 m (+ 20 cm free trim, and/or double-lengths, first
segment)
Quality: veneer - light colour, no
knots, no bulge, straight, round trunk,no rot, no decay, no wormholes, no
cracks, no splits, etc. Red heart inthe middle of the trunk, round, sound,
max. 25%
Season October 15th/ April 15th
6.). Oak (robur
& petrea Quercus) logs 1st grade (Veneer grade):
Diameter: 45 cm+, under bark
Length: 2.5 m � 3.0 m (+ 20 cm free trim, and/or double-lengths, first
segment)
Quality: veneer - no knots, no bulge,
straight, round trunk, no rot, no decay, no wormholes, no cracks, no
splits, etc.
Diameter: 50 cm+, under bark
7.) Ash parquet-friezes
Specification for measurements and
quality
Measurements
Invoice measure 26 x 75 x 300 / 350 / 400 / 450 mm
Production measure 29 x 82 x 320 / 370 / 420 / 470 mm
The rate of the lengths
30 % 300 mm � 30 % 350 mm
40 % 400/450 mm
Quality
I. st class 3 clean sides , on the back side allowed little brawn
heart until 25% of the width pc. and 1-2 sound knots with max. 10 mm
diameter
With prompt quality inspection term ,
immediately we can offer you 4 trucks / 21 To. payload , trial lot of saw
logs oak (petrae & robur Quercus) standard quality
Dimensions: middle diameter without
bark 35 cm+ , length 220 +;
Quality: A - fresh , sound knots in diameter till 30-40 mm one piece /
saw log , the all defects in concordance with APECF French Standard
allowed. In this question please send us your company standard.
If your option is strict only for saw
logs oak (petrae & robur Quercus) A grade quality , monthly we can
delivery approx. 500 m3.
Dimensions: middle diameter without
bark 35 cm+ , length 220 cm + ;
Quality: B - fresh , sound knots in diameter till 30-40 mm , one
piece / linear meter , the all defects in concordance with international
Standard allowed. In this question please send us your company standard
quality
If your option is for saw logs oak (petrae
& robur Quercus) , A + B grade quality , monthly we can delivery approx.
1000 - 1500 m3
We are offering also more
than 20 different species of wood for
1. timbers and sawn planks
2. semi-finished ;
3. skirting board / parquet friezes of oak (Quercus robur), a.s.o.;
4. building elements (beams, laths, planks, etc.) from European spruce (Picea excelsa) / natural humidity;
5. barrel staves only of Sesile Oak (Quercus petraea), manually prepared |
