Specifications of the reservoir and siphon group

RELIABILITY

As a natural result of the  meticulously controlled study , full quality with 100% SPK assurance.

QUALITY

Silent inner mechanism;enduring siphon chain.

AESTHETICS

With its modern design, it can flexibly used in any space.

NATURE FRIENDLY

Due to the Polypropylene raw material , out of which it is produced , it does not contain canserogen substances.

APPLICATION DIVERSITY

An ergonomic design enabling the inner mechanism and siphon hand to be operated on the left,as well as on the right.

CONFORMITY TO STANDARDS

Conforms to Din norms, standard production substantiated by its TES certificate.

Reservoir: Through  the filling group, stores maximum 9 liter washing water in its container and through its discharging group, washes the toilet stone by discharging this water.It consists of two main parts as the charging and discharging groups.

Charging Group: This is the hardware with a valve and buoy which automatically fills the reservoir container with washing water up to an adjustable level , and after the reservoir is filled,stops the water inflow.

The valve in the charging group can close the water flowing in the reservoir at the service pressure.It fills the water quickly.It is filled within 30 seconds with 9 liter water and cuts the water by a single action.The water level of the reservoir is between the little much water levels on the level gauging pipe.It is adjustable in different pressures.

Discharging Group: This is the hardware which consists of a valve command system which enables the outflowing of the washing water accumulated inside the  reservoir container to the toilet stone.

Parts of the Discharging Group: Clack , clack sealing ,level gauge , command handle,and command chain,these parts can be mounted or removed without removing the reservoir from its mounted place.The discharging group closes itself safely within seven seconds after each washing.

The command gear,gives action possibility to the discharging clack in a single and simple movement without jamming.The flow rate of the reservoir discharge (washing)water is 1.5 it/sec.

Having A Bellow Siphon: Polipropilen Co-polimer (plastic) is produced from a plastic material and can be used in various industrial and natural settings without getting corroded.In closed state, although it is of 150 mm length ,in open position it reaches to 600 mm length,thus extending four times over its actual length.Between the sink and the waste water pipe,due to mounting possibility under any condition,by removing the bendings and foldings in the pipes,enables a more rapid water flow.To prevent the spreading of nasty odors forming in the sewage inside  the building ,it is produced in S and P special shapes.This system,by siphoning ,always holds clean water inside at a certain height.This prevents the backlashing of the odor.The under sink cleaning can be realized without removing the accordion by giving action to the nodes.

Ground Siphon: Polipropilen Co-polimer (plastic) is produced from a plastic material and can be used in various industrial and natural settings without getting corroded.

10x10x-32 mm

10x10x-50 mm

15x15x-32 mm

15x15x-50 mm

It is produced at the above dimensioans and enables the waste water to direct into the waste channel during the cleaning of the floor coverings.

As it has the siphon feature ,it prevents the returning of the odors into the usage environment.The floor drainer has four main parts.These are the following: