Condom Production Machine length approx. 35 meters
The daily capacity of one dipping machine line and its components is approx. 750 gross.

Description of one machine

Condom Production Machine

1 Production line, dimensions: length c. 35 meters, width 1-1.2m, high approx. 1.9m connecting power 3 phase 380-440V 50 Hz 80 - 100 kW, requirement max. 40 kw each machine features: nominal operational chain speed from 60 pcs. (4.2m) up to 86 pcs/min (6m/min) controlled by inverter geared motor, 1.5 kw 1,000 borosilicate glass formers, 35mm ., with smooth surface and reservoir on line approx 930 formers, approx 70 spare formers

2 SS Dip tanks with cooling pipe and connection to chilling unit
Automatic pneumatic level control
Automatic stripping of condoms
Automatic cleaning and drying of glass formers after stripping
Automatic beading station
Fully thermostat controlled intermediate dryer, vulcanization ovens and leach tank
Machine prepared to control and record all functions by PC
Hardware and software and installation of complete monitoring system per machine

Technical data
Capacity: 60 to 80 pcs. / min., speed freely programmable
Operator: 1 operator
Power supply: 230/400 V 50 Hz, c. 80 kW connecting power, 60 kW installed
Water supply: clean, soft drinking water, c. 100 l/min.
Compressed air: 5 bar oil and water free c. 0.5 m/h (for Automatic level control)
Dimension: length x width x height: 34.7m x 1.00-1.2m x 1.85 m

Guarantee period:
One year not including normal wear and tear on parts like bearings, brushes, belts, glass formers etc.

Dry Electronic Condom Testing Machine

Application: For high voltage dry testing of condoms for thin spots and pinholes, rolling them up and sorting them to good and rejected

Description of the machine:
High voltage dry testing system
The machine has two independent testing/working places
Each place has an output of c. 38-44 PCs./min., speed is adjustable
Total nominal output of machine 220-250 gross/8 h shift depending of the ability of the operators
Each side has 6 aluminium mandrels on turntable, designed after the requirements of the customer
The condoms are tested, rolled up and separated into good or reject and collected in separate bins
Connection to PC for full data collection is optional available
Guarantee period: one year

Technical data
. capacity: 76 to 88 PCs. / min., mechanically adjustable
operator: 2 operators
power supply: 400V 3 phase, 50 Hz, c. 0.9 kW
compressed air: 5 bar oil and water free c. 2 m/h
dimension: length x width x height: 1.55 m x 1.25 m x 1.10 m
weight: c. 450 kg

Sealing Machine for Condoms

Application: For lubricating and sealing of condoms

Description of the machine:
The machine is designed for one operator, placing un-lubricated tested and rolled condoms from a tray into a segmented endless conveyor belt. The condom is pushed and pulled in to a sealing position, where the condom is lubricated with silicone oil and subsequently hermetically sealed
Total nominal output of machine 200 gross/8 h shift
A touch small monitor allows to program and displays production parameters indicates; and indicates errors or machine problems
Serrated cutting, strip length freely programmable
Provision to connect ink jet or other printer, printing table provided
Silicone dosage pump for lubrication
Option for double sealing system, that would increase the sealing capacity to approx 100 120 condoms per minute

Technical data:
capacity: output of c. 45 - 60 pcs./min., speed is adjustable
operator: 1 operator
foiling format: 55x55, 60x40, 30x70mm others on request
power supply: 230/400 V 50 Hz, c. 0.8 kW or after requirement
compressed air: 5 bar oil and water free c. 5.0 m/h
dimension: length x width x height1.80 m x 0.7 m x 1.20 m
weight: c. 500 kg

Burst Volume and Burst Pressure Test

Application: For measuring burst volume and burst pressure simultaneously according to ISO 4074/6 and EN 600-standard

Description of the machine:
4 independent cabinets, one cabinet has one mount for one condom
Interface and software for burst volume and -pressure test
Automatic door closing during test and opening after test the other sides are noise insulated
Volume metering system based on reliable and accurate gas meter
Newly designed automatic test head for easy unrolling of condoms and auto load of clamping mechanism
Break-test and abort-test button
Recording of the measured results can be stored on PC and printed out in test forms, when desired
Air flow and -pressure are adjustable at three installed pressure regulator valves
All modular technique - for easy exchange of spar parts and reduced maintenance cost - the equipment needs no special maintenance except cleaning
Including PC, monitor, interface, licensed and laboratory software
Number of cabinets to connect to PC is up to four units - more units on request

Technical data:
Power supply: 220/240 V, 50/60 Hz
Compressed air 5 bar, oil and water free
Weight: c. 55 kg per cabinet
Dimensions: 550mm x 550mm x 1,400mm per cabinet

Guarantee : gives a one-year guarantee on equipment

Electrolyte Water Test Machine

Application:
For testing condoms in the laboratory to detect leaks according to EN 600-Standard, ISO 4074

Description of the machine
Frame made from stainless steel
  Mounts for 10 condoms - designed for Afnor requirement ( filling 300ml)
Programmable water level for filling the condoms
Adjustable limit level for error report - standard is 50 mV
Recording of the measurement value during the whole submersion process
Simultaneous recording of the measured value of all 10 condoms
Saving of max. value, additional visual error report of the limit by 20 LED's green - red, i.e., good or reject
Exact records of the measured values are shown on the monitor screen and are saved in data bank and printed and if desired recalled and reprinted
Repetition function for testing the same product without adding water and influence on previous obtained results
Detection and documentation of position of hole defect of condom, expressed in mm from bead
Calibration program for convenient calibration and documentation
Solid SS support frame
Including PC, monitor and dot matrix printer interface, licensed laboratory software
Including PC, monitor and interface, licensed laboratory software

Technical data:
  Power supply: 220/240 V, 50/60 Hz
Compressed air 6 bar oil and water free
Weight: c. 40 kg
Dimensions 1.35m x 0.50m x 1.20m w/o PC

Guarantee : gives a one-year guarantee on equipment

Tensile machine according to ISO 4074/9 Standard

1. Application

For testing condoms in the laboratory to check tensile, modulus, force at break and the elongation of condoms according to ISO 4074/9- Standard

Description of the machine
Frame and working table are made from cast iron and powder coated steel sheets one column, heavy duty set up
Auto return of cross head after test
Sample cutting unit (20mm ring sample) is integrated in the machine
Windows based software specially designed for tests on condoms
Calibration program for convenient calibration and documentation
the machine will be delivered including PC and Monitor

Technical data:
  Power supply: 230 V / 50 Hz
Weight: c. 70 kg
Dimensions 0.60m x 0.40m x 1.00m

Guarantee : gives a one-year guarantee on equipment 

Automatic Condom Water tester according to BS 3704 and ISO 4074/5 Standard

1. Application

For testing condoms in the laboratory to detect leaks according to ISO 4074/5, BS 3704, EN 600- Standard

Description of the machine:
Frame and working table are made from stainless steel
Mounts for 10 condoms on a round table manufactured from Acrilic
Adjustable water amount/level for filling the condoms by timer
Auto mode and manual mode function
Pre set counter, machine stops automatically at pre set no. of tested condoms
water is recycled by a submersible pump from lower container to the upper container

Technical data:
  Power supply: 230 V / 50 Hz
Weight: c. 120 kg
Dimensions 0.65m x 0.65m x 1.90m

Guarantee : gives a one-year guarantee on equipment 

Length measuring Gage according to ISO 4074:2002

Application: For measuring the length of condoms according to ISO 4074/6 and EN 600-standard

Description of the device:
  manufactured according to ISO 4074:2002 (E) rod diameter, 25mm in diameter (spherical radius: SR12.5)
solid stainless steel rod on solid stainless steel plate
mm graduated scale is fixed to the side of the rod by 3 screws
the graduated scale has long holes at the position of the for calibration services

Technical data:
weight of unit approx: 2.4 kg
dimensions: base plate: 150mm diameter 10mm thickness stainless steel rod: height approx 30mm, diameter 25mm

Guarantee : gives a one-year guarantee on equipment

Condom Testing Laboratory list of equipment available:

1. 4 Units for burst volume and - pressure test, according to ISO 4074/6
2. 1 Electronic water test machine according to ISO 4047/5 The machines are connected to 2 PCs, supplied with calibration equipment and licensed soft ware
3. 1 British water test machine according to ISO 4047/5
4. 1 Electronic tensile and elongation machine to ISO 4047/9 with 200 N load cell inclusive integrated sample cutter. The machine is connected to a PC, supplied with calibration equipment and licensed soft ware
5. 1 Length measuring device
6. 2 Ageing Oven Memmert 160 Liters capacity
7. 1 Seal Integrity Testing Device (dessicator and vacuum pump)
8. 1 Mitutoyo Liner Gage
9. 1 Electronic Balance Model: 0.001gm x 300gm
10. 1 Electronic Caliper