In Australia most of showers run with cold water only and the water is a very precious good
Philosophy
The Water Shower Saver is a paddle-like device inserted at the base
of your existing shower system.
The simplicity of this design invites anyone taking a shower to
flick the water ON and OFF more easily than ever before. Only a
flick of the wrist is needed to turn the water completely OFF and
back ON encouraging everyone in your family to switch the water off
while soaping, shampooing, and shaving. I believe that everyone
would like to save water but it's too much trouble to turn off the
water while soaping because you have to re-create the mixture.
That's why we usually leave the water running while we soap. But
when it's THIS easy to PAUSE the water you'll instinctively stop the
water that's wasted while soaping. Because soaping takes longer than
rinsing the Every Drop Shower SaverŪ effectively doubles your water
supply for showering, or put another way, you'll easily halve the
amount of water used to shower!
Metrics
Water flow measuring tests show that a heavy 15-minute shower can
consume 200 litres of water. The Every Drop Shower SaverŪ can save
up to 100 litres per shower.
Ergonomics 101
The easier it is to do something, the more often it gets done. The
Every Drop Shower SaverŪ requires a single flick of your finger
instead of 10 actions and seconds to readjust the temperature. This
gives YOU TOTAL CONTROL with less effort.
We teach our kids not to brush teeth with the tap running
continuously - right? You wouldn't wash your car with the hose
running the entire time, would you? More wasteful than that is how
WE ALL shower now. |
