We are a private company located at 20 km East from the border with Hungary, set up in 1992 , producer and exporter of wood products.
Examples of offers Our present offer - the all quality is in concordance with Germany and Austria European standards. 1. Edged oak (petrae & robur Quercus) timbers
QF2 and QF3 standard qualit
Dimensions:
28 x 160 x 2030 (80%) and 1530 mm (20%) = measure of sawing
26 x 150 x 2000 (80%) and 1500 mm (20%) = invoice dimensions Quality: QF2 - fresh,sound knots in diameter till 20-25 mm on One side allowed and black knots 1-2 pieces in diameter till 10-20 mm on the other side allowed, without heart,sapwood not allowed; Min. 50% of the loading. QF3 - fresh,sound knots in diameter till 40-50 mm and black knots in diameter till 20-25 mm on two sides allowed, heart on one side allowed up to 1/3 of the length ,sapwood allowed only on one side; Max. 50% of the loading; Grain-ends waxed; Packing: 120 pcs on one ordinary pallet; every pallet labelled with the quality indication. Every lay on small sticks (of spruce oroak) of ca. 2 x 2 cm., on every 40cm(start with one stick on every end). This sticks, strait under each other, not smaller and not wider than the packet. * 4 straps on every pallet; is for damageby transportation.
In one cnt./truckload min. 50% QF2 and max.50% QF3. One quality in one packet. Quantity: 8 - 12 trucks/cnts. 20 ' by month, or even more (min. loading 14 m3 - Neoot/ truck) 2.) Oak (robur &petraea Quercus ) edged sawn boards
edged sawn boards, fresh cut : QFA / QF1 B / QF2-3 (max.50% QF3) , standard quality in the dimensions and full compliance to French Standard Appearance Grading Of Sawn Oak issued by APECF : Thickness:26 mm (cutting size minimum) 29mm
Width : 100 mm (cutting size 110 mm / 120 mm (130) / 140mm (150) / 160 mm (170) / 180 mm (195) / 200 mm (215) ; Length: 2000 mm. and up, steps 100mm (3cm. oversize in length) Quality QFA: All 4 sides clear, no heart, no sapwood, no cracks, no moonrings, fresh cut, one dimension on a pallet, on dry softwood stickers of min. 20 mm. thickness, every 50 cm one lath and at the ends, ends paraffine-waxed, pallet height 1100mm, 3 cm. oversize in length. Quality QF1B: Maximum 2 intergrown sound knots of 10 mm maximum per linear meter on each side , no heart, no sapwood, no cracks, no moonrings, fresh cut, one dimension on a pallet, on dry softwood stickers of min. 20 mm. thickness, every 50 cm one lath and at the ends, ends paraffine-waxed, pallet height 1100mm, 3 cm. oversize in length. Quality QF2:
Small knots without limitation – maximum 3 intergrown sound knots of maximum 25 mm per linear meter, on each side , no heart, no sapwood, no cracks, no moonrings, fresh cut, one dimension on a pallet, on dry softwood stickers of min. 20 mm. thickness, every 50 cm one lath and at the ends, ends paraffine-waxed, pallet height 1100mm, 3 cm. oversize in length. Quality QF3:
Small knots without limitation – maximum 3 intergrown sound knots of maximum 35 mm per linear meter, on each side , no heart, no sapwood, no cracks, no moonrings, fresh cut, one dimension on a pallet, on dry softwood stickers of min. 20 mm. thickness, every 50 cm one lath and at the ends, ends paraffine-waxed, pallet height 1100mm, 3 cm. oversize in length. 3.) Fresh Oak (petrae & robur Quercus) and Turkey Oak (Quercus cerris) special offer Our special offer of min. 300 - 400 m3/month is fresh Oak and Turkey Oak unedged boards / timber , in the following quality grade and dimensional structure:
thickness : sawing measure 54 mm / invoice 50 mm or sawing measure 28 mm / invoice 26 mm ; width at the middle of length : 15 cm+ (40%) and 20 cm+ (60%)
lengths : 2 m - 2,5 m (30%) and 2,5 m + (70%) Quality:
5 - 10% QFo/QF1 - the both sides of width , clean;
20 - 25 % QF2 /QF3 difference QF3/QF4 4.) Spruce timber/boards for construction Quality: fresh and/or AD, allow unlimited sound knots in number and diameter measure and black knots until 25mm in diameter, also allow only suond / health heart - approx. equal with the spruce timber cross section/coloration, occasional / discret allow the little discoloration, the edge are clean and parallel. Air dried(AD) spruce - is the time from wood cut until at the delivery date and to comprise the real transport shipping time at the buyer destination.
Quantity/month = min. 500 - 1.000 m3 5.) Beech (Fagus sylvatica) logs 1st grade (Veneer grade): Diameter: 50 cm+, under bark
Length: 2.5 m – 3.0 m (+ 20 cm free trim, and/or double-lengths, first segment) Quality: veneer - light colour, no knots, no bulge, straight, round trunk,no rot, no decay, no wormholes, no cracks, no splits, etc. Red heart inthe middle of the trunk, round, sound, max. 25% Season October 15th/ April 15th 6.). Oak (robur & petrea Quercus) logs 1st grade (Veneer grade): Diameter: 45 cm+, under bark
Length: 2.5 m – 3.0 m (+ 20 cm free trim, and/or double-lengths, first segment) Quality: veneer - no knots, no bulge, straight, round trunk, no rot, no decay, no wormholes, no cracks, no splits, etc. Diameter: 50 cm+, under bark 7.) Ash parquet-friezes Specification for measurements and quality Measurements
Invoice measure 26 x 75 x 300 / 350 / 400 / 450 mm
Production measure 29 x 82 x 320 / 370 / 420 / 470 mm The rate of the lengths
30 % 300 mm – 30 % 350 mm
40 % 400/450 mm Quality
I. st class 3 clean sides , on the back side allowed little brawn heart until 25% of the width pc. and 1-2 sound knots with max. 10 mm diameter With prompt quality inspection term , immediately we can offer you 4 trucks / 21 To. payload , trial lot of saw logs oak (petrae & robur Quercus) standard quality Dimensions: middle diameter without bark 35 cm+ , length 220 +;
Quality: A - fresh , sound knots in diameter till 30-40 mm one piece / saw log , the all defects in concordance with APECF French Standard allowed. In this question please send us your company standard. If your option is strict only for saw logs oak (petrae & robur Quercus) A grade quality , monthly we can delivery approx. 500 m3. Dimensions: middle diameter without bark 35 cm+ , length 220 cm + ;
Quality: B - fresh , sound knots in diameter till 30-40 mm , one piece / linear meter , the all defects in concordance with international Standard allowed. In this question please send us your company standard quality If your option is for saw logs oak (petrae & robur Quercus) , A + B grade quality , monthly we can delivery approx. 1000 - 1500 m3 
We are offering also more than 20 different species of wood for
1. timbers and sawn planks
2. semi-finished ;
3. skirting board / parquet friezes of oak (Quercus robur), a.s.o.;
4. building elements (beams, laths, planks, etc.) from European spruce (Picea excelsa) / natural humidity;
5. barrel staves only of Sesile Oak (Quercus petraea), manually prepared | 
