| MAG engineering provide low pressure solar collector, it
widely used for domestic hot water (DHW), pre-heating and etc in different
fields. The system compose by one manifold with 50 vacuum tubes of
dia.47 or dia.58. Frame by galvarnized steel of 3¡Á3cm with 2.8mm
thickness. The system can be made by passive system or active system
according to the tank installation. The tank volume over 1T, we suggest
for active system.
Features:
* Reliable, efficient, twin-glass vacuum tube
* Easy plug-in installation An economical solution
* An economical solution
* Could be either vertically or horizontally positioned
* Especially suit large commercial or industrial applications, such as
farm, restaurant, hotel, factory,etc.
* All stainless steel frame (304 2B grade)
MODEL |
Absorbing
Area |
Vacuum Tube |
(m2) |
Diameter |
Length |
Qty |
MSC4724 |
1.20 |
¦47mm |
1500mm |
24 |
MSC4748 |
2.40 |
47mm |
1500mm |
48 |
MSC5824 |
1.92 |
58mm |
1800mm |
24 |
MSC5848 |
3.84 |
58mm |
1800mm |
48 |
NOTE: absorber area is the part of the collector that
actively absorbs the light rays. For solar tubes this is defined as the
cross-sectional area of the inner tube (selective coated) measured using
the outside diameter. (Eg. 0.047 x 1.72m = 0.08m2 |
