|
The separate pressurized solar water heater system is made
up of solar collector, pressurized water tank, working station, expansion
tank, stainless steel frame and whole kit of stainless steel fasteners.
1. The water tank includes two heat exchange coil inside
and a 1500 electrical heater as a backup heater.
2. The working station includes circulation pump,
intelligent controller with sensors, setting online (flux controller),
pressure meter, pressure release valve, one-way valve, ball valve, copper
pipes, insulation shell.
Product Description
Working principle:
1) When the temperature of the heat collector reaches the set value, the
controller will make shall the circulation pump work automatically.
2) The circulation pump makes heat-conducting liquid circulate
automatically.
3) The heat-conducting liquid transfers heat to water by the heat
exchanger in the tank.
4) In case the temperature of the circulation pump does not reach the set
value, the circulation pump will be shut automatically.
5) In case the temperature of the tank does not reach Tm ax, then start
the auxiliary heating device.
Feature:
Collector separates with storage tank. The tank can be put in any place of
house. And the collector can be put on the inclined roof or flat place.
Module design, arbitrary combination, harmony with the building perfectly;
Intelligent control and automatic operation;
Anti-freeze: No water inside the tubes when it works.
The system controller has the anti-freezing function is that the
temperature circulation will operate while it reaches the fixed
temperature.
Multifunction: Bathing, washing, domestic heating etc;
Work at anytime and enjoyable.
Structure:
The split solar water heater is composed by heat collector, storage tank,
controller, working station and installation parts.
Model No: 100L 150L 200L 250L 300L
Technical layout
Expansion case and working station |
