|
In each vacuum tube there is a U
pipe with direct flow-through that is connected to the header pipe inside
manifold. This U pipe is seamed in an aluminum heat transfer fin in the
interior of vacuum tube that transmits the heat from the interior tube to
the U pipe.
Solar radiation permeates the outer glass tube and is
captured on the outside of inner glass tube by highly selective sputter
layer. The captured solar radiation is transmitted to flush-contact
aluminum shield and then copper pipe filled with heat transfer fluid. The
360 degrees aluminum heat transfer fin assures the fastest energy
transfer.
|
Model |
MSCU58 |
|
Manifold casing
material |
Anodized aluminum (2.5-3mm) |
|
Frame material |
Anodized profiled aluminum bar (2.5-3mm) |
|
Header pipe material |
Copper |
|
U pipe material |
Copper |
|
U pipe diameter |
8mm |
|
No. of pipes |
16 |
|
Aperture area |
1.44m2 |
|
Insulation |
Rock wool |
|
Rubber seals and rings |
UV stabilized high temperature silicon rubber |
|
Test pressure |
9 bar |
|
Collector mounting |
Flat roof/inclined roof |
|
Mounting angle |
30 degree-50 degree |
|
Inlet Outlet |
3/4¡± |
|
Gross weight |
45KG |
|
