|
Our plastic and metal parts or devices services are classified in two groups:
- Product design and engineering
- Outsourcing and management of Production in Asia.
Founded in Hong Kong we are established in Shanghai with an office in the Netherlands.
European ownership and management, Chinese speaking.
Total staff: 40 persons with engineers, tool engineers, plastic engineers,
project managers, professional quality inspectors, a sourcing team and
three European managers who speak Chinese.
We work with well known major European companies
Products include industrial lighting fixtures, high-end
dental care equipment, cleaning utensils, agricultural parts, scaffold
clamps, export of plastic injection tools
We managed also the complete construction and setup of 2
factories in joint-venture.
Due to a combination of western creativity and reliable
execution in China, innovation and therefore development opportunities,
become into reach again. We combine European design with Chinese
engineering and production that is why we can offer this at a very
competitive price.
By evaluating each product on its complexity, quality
requirements and delivery time, we select within our network of
manufacturers and suppliers the right production partner. Because of this
flexibility we can thought the right mix of price, quality and delivery
time always fulfill your wishes.
Innovation is the basis of growth of each company and does
not need to be expensive this way.
Plastic and metal products Design
Europe is still very well known in term of Industrial
Design. We have tight corporation with several industrial designers and
works closely with engineering offices and technical department of
companies.
We can offer you a free consultation between your company
and an industrial design office within our network to exchange new ideas,
but also about functionality and design of your current product and or
concepts. Thus you can always follow the fast changing market demand and
requirements of your clients of new markets.
A first draft is enough to realize a final and efficient
design in 2D and 3D. This again in close cooperation with European
industrial designers. Especially in this phase large saving can be made in
the design.
Cost Reduction:
In combining European style design with high quality and skilled
engineering in China we are able to benefit from the advantages both parts
of the world have to offer. European designers are praised and followed
all over the world for their sophisticated and trendy product designs,
whereas China has high quality yet low cost product, production
engineering and prototyping to offer. This combination will ensure you to
lowering the total costs of the product innovation process.
Plastic and metal products engineering
Our team of European designers and
engineers takes the product engineering phase to a new level. By guiding
your initial innovative ideas throughout the process, we develop a
clear-cut concept in which the production of the final design is produced
entirely in China.
By leveraging the unique combination
of western design with the low-cost engineering, production and quality
control in China, your company is able to quickly develop a competitive
edge in the global mark place.
Material quality, safe usage and technical requirement
define the overall quality of a product. The materials and tolerances are
tested in their application according to your approved drawings of the
final design. All these aspects are developed in accordance with your
requirements.In the final
stage of the design, a prototype will be made in order to verify the
practical application of the product. This can be done either in Europe or
in Asia, according to the customer's needs.
Plastic and metal
tools Design
Each design undergoes a careful feasibility
study in cooperation with our local partners. Our tool engineering and the
Chinese production partner prepare the mould design based upon our
customer specifications. Subsequently the first mould design proposal is
analyzed and optimized during the discussion with our customers. Efficient
communication is a key factor for the success of the projects.
Important specifications considered include for example:
|
Position
of the ejectors
Injection gates
Tolerances
Release angles
Mould design |
Material Fdow
Cooling
Position of slides
Cgcle timc
|
By providing an initial sample report (FOT) for the
first product sample, accompanied by our quality analysis, clients are
able to make informed decisions early on the process in regards to desired
modifications, resulting in achieving optimal results
Plastic and metal products
prototyping
As an important step in the engineering
process of developing a product, CHC provides prototyping and reverse
engineering services to its customers. Prototypes enable us to verify the
design and design functions which in turn will give the required info to
optimize and finalize the product design.
Through our partners we have access to the
latest rapid prototyping technologies such as SLA, SLS, LOM and FMD, but
also to conventional prototyping such as for example CNC machining of
materials as Aluminium PMMA and ABS, silicon molds, vacuum molding and EPS
modeling
Reverse Engineering will enable you to
reverse the innovative process. By using a 3D optical scanner, almost any
product can be digitalized. This enables you to quickly optimize, adjust
or change your existing product.
Some customers require initially a small
batch of products for testing and/or marketing reasons. CHC meet this
requirement by offering Vacuum molding and Rapid Tooling (DMLS) services
to them.
Plastic and metal products manufacturing Support
China is the world's manufacturer, but how to choose the
most reliable and best suited factory for the production. Each factory has
its own specialization and knowledge of production processes.
As a result of our extensive selection process, we
established a solid network of entrusted manufacturers and have acquired
experiences with various production methods
Our areas of expertise include:
- Extrusion of aluminium and plastics
- Plastic molding (injection, 2K, blow, vacuum)
- Aluminium and steel casting
(sand casting, die casting, lost wax, gravity)
- Machining of metals (drilling, milling, grinding,
bending, punching )
- Surface treatments (anodizing, polish, sandblasting,
coating)
- Assembly of products
- All of our suppliers, packaging and quality control
are supervised by us. Through our rigorous selection process we harness
the world manufacturing power to suit the needs and the requirements of
our clientele.
Plastic and metal products quality control
By anticipating the challenges that are inevitably part of
the production process, we enforce Quality Control measures during each
step. This includes verifying the final product, design feasibility and
communicating with the client on an ongoing basis and processing feedback
in a constructive manner. In addition, we ensure
the following tasks:
- A selection of the right production partners on the
basis of quality standards
- Verifying the suppliers of the selected factories
- Random quality checks during the production
- Random product test after production and before
shipping.
- Produce certified quality reports upon request
All of our suppliers, packaging and quality control are
supervised by us
Under client's request, we can also consult a third party
to confirm the composition of the material
Examples
FAQ and
other products photos
Now open our own workshop for
parts assembling to
guarantee the highest quality control and to avoid copying
Information
|
