Cold rooms and closing walls are
made with injected polyurethane insulation, with a density of 40 kgs/m3,
coated with varied materials, such as pre-painted sheets or cincalum,
stainless steel, plasticized sheets, PRFV, Pluss, Corlock, etc. or a
combination of them. These panels have different widths according to the
uses intended; thus we count with panels from 60 to 140 mm. wide, that
admit extreme preserving temperatures from 100 down to -40 C. The
interlocking device between panels is made of eccentric fast lock oscilock
steel hooks, reinforced at the edges with an auto-adhesive sealing plush
to get air and watertight gaskets.
Models and
measures versatility, allowing extensions .
Non-toxic, non-igneous, thermal and acoustic insulating material
Dimensional stability and high durability
Light and easy assembly.
Useful for different applications such as cold rooms, air-conditioning
rooms, industrial warehouses, closing panels for homes and offices,
internal dividing panels, mountain and high altitude buildings, etc.
Important resale value.
Technical data
Insulation:
Ecological polyurethane (PUR)
Density:
40 kg / m3 a 41 kg / m3.
Surface:
Pre-painted white Sheets; cincalum (zinc-aluminium) sheet, PRFV (fibre-glass reinforced
plastic), stainless steel, etc.
Thickness:
40 / 60 / 70 / 100 / 120 / 140 mm
Length:
up to 8,30 m
Doors options:
Jamb doors.
Sliding Doors.
Walk-in cooler doors.
Sectional doors
Panels
Assembly system by means of
eccentric oscilock steel hooks: it connects the panels with a twist and
pull movement by means of a hexagonal spanner. The unit is always in
conditions of being dismantled.
The union between panels is
made of naked polyurethane, which is protected with a permanent elastic
sealing material, especially formulated to get the total absence of the
thermal bridge. Its easy assembly allows the enlargement of built modules,
reforms, modifications, divisions, etc., giving faster times in its
construction.
Full panel width: 1.18 m. Half
panel width: 0.57 m.
Wide temperature range: -80 C
/ +80 C
Corner single panel: up to 4 m.
high.
Accessories
Plastic floor racks useful for
those chambers that need frequent cleaning, since this rack can be removed
to be cleaned
Flexible PVC curtain for cold-storage chambers used in preserving and
freezing
Balancing pressure valve
Sanitary beam
sanitary socle
External finishing beam
Floor PVC U beams
Floor PVC U beams
Floor PVC U
beams (Polyvinyl chloride), with wings that end in flexible material to
assure perfect panel beam seal. They are used in floorless modular
chambers. Approved by Argentina Servicio
Nacional de Sanidad y Calidad Agroalimentaria.
In order to
improve its performance, these beams are chemically treated with:
UV filter (to give high resistance to ultraviolet radiation)
Impact improver (it gives greater hardness to beams to receive shocks)
Fungicide (to avoid the growth of fungi and bacteria)
Medium and low temperatures industrial and commercial cold
air units
Commercial (20
models, 5 /+5
celcius or - 10 /-25 celcius from 1,5 to 10 HP)
New functional designs
Better performances and economy
Practical and low cost installation
Digital control board, 25 programmable functions with a high technology
microprocessor (Built-in or remote).
Hot gas defrosting
Low-noise fan evaporators
Industrial (7
models, -5 /+5 celcius or - 10 /-25 celcius from 10 to 20 HP)
Functional Design
Better performance and economy
Semi air-tight air cooled compressor with an exclusive electronic
protection system
Fans protected against over-intensity and high temperature
Electric resistance defrost
Electronic board with a wide array of protections: lack of phase, high and
low tension, overcharge, short circuits, etc.
Remote control that satisfies the most demanding installation |
